{"id":2495,"date":"2026-10-27T02:10:58","date_gmt":"2026-10-26T23:10:58","guid":{"rendered":"https:\/\/temak.com.tr\/en\/what-is-a-centre-drill\/"},"modified":"2026-10-27T02:10:58","modified_gmt":"2026-10-26T23:10:58","slug":"what-is-a-centre-drill","status":"publish","type":"post","link":"https:\/\/temak.com.tr\/en\/what-is-a-centre-drill\/","title":{"rendered":"What Is a Centre Drill? Applications, Angles and Selection Criteria"},"content":{"rendered":"<p>In machining \u2014 whether on CNC machining centres or on manual\/CNC lathes \u2014 locating the hole centre before drilling is of great importance. Starting directly with a standard drill can cause the drill point to walk on the surface, the hole to drift off axis or even the tool to break.<\/p>\n<p>In this article, with guidance from <strong>Temak Teknik<\/strong>, we look at the main functions, types, angle standards and rules for correct use of centre drills.<\/p>\n<h2>1. Main Purpose and Features of a Centre Drill<\/h2>\n<p>The main task of a centre drill is <strong>centring and guiding<\/strong>:<\/p>\n<ul>\n<li><strong>Prevents Axial Drift:<\/strong> Prevents the drill point from walking, especially on curved, contoured or angled surfaces.<\/li>\n<li><strong>Rigid Design:<\/strong> Centre drills are made from tool steel and do not deflect. Under axial stress or misalignment they break rather than bend. This ensures that the initial centring is made perfectly square.<\/li>\n<li><strong>Countersink Depth:<\/strong> Unless there is a specific technical requirement, a centre drill is used by plunging it to approximately half the length of its countersink section.<\/li>\n<\/ul>\n<h2>2. Centre Drill Types and Material Grades<\/h2>\n<p>Centre drills are made from different materials depending on the hardness of the workpiece material, the machine type and the operating conditions:<\/p>\n<ul>\n<li><strong>HSS-Co (8% Cobalt):<\/strong> One of the new-generation tool steels. Its high cobalt content makes it wear-resistant and delivers long tool life.<\/li>\n<li><strong>Carbide Centre Drills:<\/strong> Used in very hard materials and for work requiring high precision. However, as carbide is a brittle material, it must be used in vibration-free conditions; on machines prone to vibration it can break quickly.<\/li>\n<li><strong>Long Centre Drills:<\/strong> Preferred on machining centres (VMC) or for centring holes in deep or hard-to-reach areas.<\/li>\n<\/ul>\n<h2>3. Standards and Angle Values<\/h2>\n<p>Centre drills are manufactured to specific industry standards:<\/p>\n<ul>\n<li><strong>Standards and Angles:<\/strong> The most common centre drills on the market conform to <strong>DIN 333<\/strong> and generally have a <strong>60\u00b0<\/strong> angle. Depending on CNC applications and requirements, this angle can go up to 90\u00b0.<\/li>\n<li><strong>Pilot and Shank Diameter Relationship:<\/strong> Centre drills are designated by their pilot diameter (for example, a centre drill with a 2 mm pilot diameter may have a 5 mm shank\/body diameter).<\/li>\n<li><strong>Choosing the Right Diameter:<\/strong> A centre drill matching the diameter of the drill to be used should be selected. Using an oversized centre drill creates an excessively wide centre countersink in the workpiece and impairs dimensional accuracy.<\/li>\n<\/ul>\n<h2>4. Rules to Observe in Use<\/h2>\n<ol>\n<li><strong>Facing:<\/strong> On a lathe, the face of the workpiece must always be faced to obtain a flat surface before drilling the centre hole.<\/li>\n<li><strong>Short Clamping:<\/strong> Rigidity should be increased by clamping the part and the centre drill holder (drill chuck or collet) as short as possible.<\/li>\n<li><strong>Speed and Feed Calculation:<\/strong> The cutting speed (<span class=\"math inline\"><em>V<\/em><sub><em>c<\/em><\/sub><\/span>) should be determined according to the workpiece material (steel, cast iron, aluminium etc.), and the spindle speed calculated accordingly (<span class=\"math inline\">$n = \\frac{V_{c} \\times 1000}{\\pi \\times d}$<\/span>).<\/li>\n<li><strong>Centre Hole Depth Standards:<\/strong> In series production or when supporting parts with a tailstock centre, standard centre hole depth tables proportional to the material diameter should be used as a reference.<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"<p>Centre drills locate and guide holes before drilling; learn about their types, materials, DIN 333 angles and rules for correct use.<\/p>\n","protected":false},"author":4,"featured_media":2458,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[76],"tags":[],"class_list":["post-2495","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/posts\/2495","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/comments?post=2495"}],"version-history":[{"count":0,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/posts\/2495\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/media\/2458"}],"wp:attachment":[{"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/media?parent=2495"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/categories?post=2495"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/temak.com.tr\/en\/wp-json\/wp\/v2\/tags?post=2495"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}