In series production and assembly, thread dimensions must fully comply with international standards so that manufactured parts can work together without problems anywhere in the world (interchangeability). The thread form, pitch and tolerance of machined screws and nuts are reliably verified using thread gauges (thread inspection gauges).
What Is a Thread Gauge and What Types Are There?
Thread gauges are inspection tools that are hardened and precision ground specifically for the thread size to be checked. They are manufactured in accordance with international quality standards such as ISO 1502, DIN 13, BS 913 and TS 3.
They are generally classified into two main groups:
- Plug Gauges: Used to check the threads of nuts and internally threaded parts.
- Ring Gauges: Preferred for checking externally threaded parts such as bolts, studs and shafts.
Plug and ring gauges are also available for all thread standards, including Metric (M), Unified (UNC/UNF), Trapezoidal (TR) and Taper (NPT/R).
The “GO” and “NO-GO” Working Principle
Thread gauges are based on a dual inspection principle:
- GO Gauge: Indicates that the thread form and tolerance limits of the part are within specification; it should screw in freely without binding. Its body is usually thicker.
- NO-GO Gauge: Verifies that the thread has not been machined oversize or out of tolerance. When the gauge is applied to the thread, it should not advance more than a few turns and should stop as it tightens. It has a red mark/ring on its body so it can be easily distinguished visually.
Tips to Increase Efficiency on Your Shop Floor
- Direct Inspection at the Machine: Gauges should be kept beside the machine from the very first part produced, so that tool wear or offset deviations can be detected and corrected immediately.
- Series Production Inspection Strategy: In high-volume production, periodic gauge checks (e.g. every 10th part) limit defective parts to the last batch only in the event of tool breakage or chipping, reducing scrap rates.
- Galvanised Coating Tolerance: If the part will receive a surface coating (galvanising, etc.) after machining, a special tolerancing strategy can be applied that takes the coating allowance into account, allowing the NO-GO side to enter with a snug fit.
The Importance of Periodic Calibration
Even though they are made from specially hardened steel, gauge dimensions can change over time due to continuous use, impacts or wear. To maintain your machining quality and export standards, it is recommended that your thread gauges are calibrated at least once a year.
For high-precision thread gauges and measuring instrument solutions suited to your production processes, visit our website temak.com.tr and get information from our technical experts.
