Callipers are among the most frequently used basic measuring instruments in machining and quality control processes. Used to verify outside diameters, inside diameters, depths and step dimensions of parts quickly and practically, callipers deliver high efficiency in manufacturing processes when correctly selected and used.
Watch Temak Teknik’s informative video below covering calliper types, reading techniques and protection classes:
Calliper Types by Display Type
Callipers are divided into three main categories according to user preferences and working environments:
1. Mechanical (Vernier) Callipers
Readings are taken using the vernier graduations on the slider. They are produced with different resolutions such as 0.05 mm, 0.02 mm and 1/128 inch. Because they require no electricity or batteries and are economical, they are widely used in machining.
2. Dial Callipers
By eliminating the difficulty of reading fine vernier graduations, they display the precise value beyond the whole number on a dial indicator. Models with 0.02 mm resolution provide visually convenient readings.
3. Digital Callipers
Display the measured value directly on a digital screen, enabling fast and error-free reading. Advantages include one-touch mm/inch conversion and relative (incremental) measurement. When choosing a digital calliper, models with an ABS (Absolute) encoder system, which do not lose their reference point when switched off and on, should be preferred.
Calliper Types for Special Measurements
- Depth Callipers: In wide and deep grooves where full perpendicularity cannot be achieved with the depth rod of a standard calliper, their wide base provides accurate, error-free depth measurement.
- Inside Groove Callipers: With specially curved and pin-type jaws, they are used to measure the diameters of circlip and O-ring grooves on the inner surfaces of cylindrical parts.
- Outside Groove Callipers: Used to precisely measure narrow external grooves and shoulder recesses that standard calliper jaws cannot reach.
- Heavy-Duty (Long) Callipers: Callipers with robust bodies used to measure large parts of 300 mm, 500 mm, 1000 mm and above.
Environmental Protection Standards for Shop-Floor Conditions (IP Ratings)
In machining environments, soluble oil, coolant, dust and moisture can damage the electronic components of digital measuring instruments and cause measurement deviations. The IP protection class should therefore be chosen to suit the working environment:
- Standard Digital Callipers (No IP Protection): Not suitable for humid and dusty environments; should only be used in dry quality control areas.
- IP54 Callipers: Protected against dust and splashing water/coolant from any direction. Ideal for workshop conditions with moisture from hands or light contact with soluble oil.
- IP67 Callipers: The highest level of protection, fully dust-tight and resistant even to temporary immersion in liquid. They provide long service life for in-machine measurements where coolant is used heavily.
Tips for Accurate Measurement and Maintenance
- Use the Jaws Correctly: Do not drag the jaws across the workpiece or force them off-axis during measurement; this distorts the jaw geometry and causes wear.
- Step Measurement with the Rear Faces: When the upper rear faces of the fixed and moving jaws of a vernier calliper are zeroed against each other, they provide an ideal reference surface for measuring height differences on stepped parts.
- Calibration and Verification: To maintain measurement reliability, callipers should be calibrated at least once a year, and verification checks should be carried out periodically on the shop floor using gauge blocks.
For the calliper types and measuring solutions best suited to your machining and quality control processes, visit our website temak.com.tr and get support from our team of experts.
