ER Collets and Collet Chucks: Application Standards

ER Collets and Collet Chucks: Application Standards

As the most common and versatile tool clamping solution in machining operations, ER collets and ER collet chucks are designed to securely clamp a very wide range of tool shank diameters.

Watch Temak Teknik’s video below on the selection principles, advantages and correct assembly steps of ER collet systems:

Key Features and Advantages

  1. Wide Range of Size Standards: ER collet systems come in different size codes such as ER08, ER11, ER16, ER20, ER25, ER32 and ER40 [00:17]. Slim-body models (ER08, ER11) are preferred for reaching into narrow, deep cavities, while larger-body models (ER32, ER40) are chosen for roughing operations requiring high torque [01:37], [01:55].
  2. Intermediate Sizes and Flexible Clamping: In addition to standard drill or milling cutter diameters, tools with special intermediate decimal diameters such as 11.5 mm can be clamped securely thanks to the collets’ collapse range (0.5 mm, 1 mm or 2 mm clamping range) [00:26].
  3. Different Body Lengths: Holder bodies are available in 75 mm, 100 mm or longer L-length options to suit different plunge depths [01:45].

Correct Use and Limitations

  • Risks in Heavy Milling: ER collet chucks are highly economical and ideal for general milling, drilling and reaming operations [00:51]. However, in heavy rough milling the cutting load creates a risk of tool pull-out and damage to the collet slots, so Weldon, roller-type or hydraulic chucks should be preferred for such heavy operations [01:18].
  • Tapping Limitation: Standard ER collets do not provide a positive lock when clamping a tap shank, so the tap may slip under high torque. Tapping chucks with a safety clutch or spring-loaded tap holders should be used for tapping operations [01:00].
  • Assembly Sequence: During assembly, the collet should first be seated at an angle into the eccentric ring inside the nut, and only after hearing a “click” should the nut be screwed onto the holder body [02:04].